Use a Hulk Hand Smasher Rod for light duty installations.
Hulk Earth Anchors can be driven into the ground using a sledge hammer or post driver by hand. This method is ideally suited to installations of smaller Hulk Earth Anchors or installations of limited quantities.
Although installation with a hand smasher rod is more labour intensive than powered installations, the Hulk Hand Smasher solution negates the need for powered installation equipment. This makes anchor installations on sites with difficult access, with no access to electricity, or alternate power sources possible. With smaller numbers of anchors to install the Hand Sasher rod saves the costs associated with purchasing or hiring additional installation gear such as Jackhammers, hydraulic power packs, air compressors or the like.
Hand Drive Rods for HP Range and H Range Anchors
Hulk Hand Smasher rods are available for installation of Hulk HP25, HP35 and H Range earth anchors.
The unique benefit of the H range of earth anchors is that the H50, H80 and H110 anchor models all use the same driving rod so no additional rods are required when switching to a different anchor size within the H Range.
Hand smasher rods are re-usable and are removed from the ground after the anchor has been hammered to its required depth.
Order Code: | Description: |
---|---|
HSH-25 | Hand Smasher Rod for HP 25 anchor - Length 600mm |
HSH-35 | Hand Smasher Rod for HP 35 anchor - Length 1000mm |
HSH-50 | Hand Smasher Rod for H50, H80 and H110 anchors - Length 1300mm |